MuseSoftwareDebugging & incidentsAI score · 60/100AI-assisted edit · no obvious prompt-injection riskX

Muse Reverse-Engineered TV Firmware and Debloated via ADB

Input: TV firmware and network environment → Process: Muse analyzes firmware diffs, plans debloat, connects via Tailscale, disables packages via ADB → Output: Leaner system, fully reversible

ExperiencedStepsTip
Who
Users with Android debugging and networking experience
You get
Disabled 10 pre-installed packages and killed background junk, all reversible
You need
Muse · Tailscale · ADB

Constraints

Prerequisites: ADB debugging enabled on TV; same network or Tailscale mesh; firmware download source available. Risk: modifying system packages may cause device instability; backup recommended.

What they did

User @Chatsalll used the Muse agent to address bloat on their smart TV. Muse downloaded the last two firmware versions, reverse-engineered and compared them to identify changes, developed a debloat plan, connected to the TV using Tailscale, disabled 10 packages via ADB, and killed other background junk processes.

How it went

The author reported successful completion: 10 packages were disabled, background junk processes were cleared, and everything was fully reversible (author_report). No specific performance metrics or timing were provided.

Worth knowing

The author noted 'Prompt in the image', but the original image was not OCR'd and the actual prompt content is unknown. The source text contains the grammatical form 'reverse engineered it to compared' as written. Tailscale and ADB require prior network and debugging setup; firmware acquisition methods vary by TV model; disabling system packages carries bricking risk—always preserve rollback capability.

Steps

  1. Fetch and analyze firmware

    Download the last two firmware versions for the TV, use Muse to reverse-engineer and compare differences, identify changed system packages, and develop a debloat plan.

  2. Connect to TV via Tailscale

    Install Tailscale on both the TV and the control device, log in with the same account, and establish a virtual LAN so ADB commands can reach the TV.

  3. Disable bloat packages via ADB

    Connect to the TV over ADB and run pm disable-user or pm uninstall -k --user 0 to disable the 10 target packages. Record package names for rollback.

  4. Clean up and verify reversibility

    Kill unnecessary background processes, verify system stability. Keep original firmware and package name list so all disabled packages can be re-enabled or recovered by flashing.

Prompt you can copy

Reference prompt · Editorial suggestion。Confirm the destination, input variables and output format before use.

This block is the prompt. Ads are never placed here.

No prompt needed — just follow the steps.

No copyable prompt for this case; execution relies on ADB commands and Muse autonomous operation.

Source

Muse 反编译电视固件、Tailscale+ADB 去臃肿并禁用 10 个包（可回滚） · Chatsalll · X · 2026-10-18T18:15:19.000Z

Comments & feedback

Tried this method? Share results, problems or improvements. Comments appear after moderation. Please avoid sensitive information.

Loading…

    Related